Why buy this pressure-relieving mattress?
The MOBI 4 pressure relief mattress features one of the most advanced systems of its kind . The multi-mode pump not only offers alternating pressure redistribution but also has a static mode with constant low-pressure reduction. In alternating mode, pressure is periodically redistributed by cells that inflate and deflate, mimicking the natural movement pattern of sleep, and preventing long-term pressure buildup in the fabric.
In static mode, the pressure of the pressure-relieving mattress is reduced by approximately two-thirds compared to the same pressure level in alternating immersion and wrapping mode. It also features visual alarms that notify the caregiver of any unusual situation. The system is ideal for reducing the risk of human error and is suitable for the prevention and treatment of all stages of pressure ulcers.
This air cell mattress is one of the most complete and effective on the market, featuring an efficient system that alternates between dynamic and static therapeutic cycles. The pressure adjustment on this air mattress is excellent, thanks to its 20 individual cells that inflate and deflate alternately in cycles, providing patients with appropriate pressure relief.
Some of the features that define this pressure-relieving mattress will help you decide:
- It features a PU nylon cover with a cotton lining that is environmentally friendly, vapor-permeable, water-resistant, and also has a CA117 flame-retardant fabric. It also reduces the seepage of unwanted liquids, and the cover comes with a zipper that runs around the entire mattress protector for easy removal and washing.
- The cells incorporate a low air loss ventilation system to remove moisture, thus maintaining patient comfort.
- The pressure ulcer mattress system can switch from dynamic to static mode to facilitate all types of nursing procedures, including dressing changes.
- As mentioned previously, it has an alternating function in which the pump will inflate and deflate the cells at regular intervals that can be 10 or 12 minutes, to change the contact position between the patient and the bed, thus stimulating blood circulation to prevent ulcers and facilitate recovery, also reducing patient pain and intensifying nursing work.
- It also includes a pillow function, in which the cells positioned at head height do not inflate to provide greater comfort to the patient.
- It incorporates lower cells as basic pressure support in case of system power failure, without an additional foam rubber base.
- The air tubes contain springs inside. These springs are installed to prevent any unwanted bending or kinking of the tubes connecting the pump and the mattress, thus maintaining a consistent airflow.
- The air cell mattress incorporates CPR straps to deflate the mattress more quickly in case of emergency.
- It also includes a non-slip elastic band to prevent movement of the motorized pressure relief mattress .
- It comes with 1 spare cell.
- Finally, it contains a quick and easy-to-use connector to transform the mattress from a motorized support surface to a sealed static air mattress .
It's suitable for any bed; use it at home or in the hospital. It will help you rest better. Installation is very simple: it simply extends over the air mattress, leaving the tubes at the foot of the bed to connect to the included silent compressor.
Technical specifications of the compressor:
- Power: AC 220-240V, 50Hz; 100-120V, 60Hz
- Airflow: 7-8 liters/minute
- Pressure range: 55-120mmHg
- Cycle duration: 12 min (50Hz); 10 (60 Hz)
- Dimensions: 30x13.5x11 cm
- Weight: 2 Kg
- Noise: 34db.
Technical characteristics of the 90 cm wide anti-decubitus mattress:
- Color: Blue
- Eschar stage I, II, III and IV
- Latex-free
- Material: TPU Nylon
- Cover material: Nylon PU and cotton lining
- Inflated dimensions: 200 x 90 x 22 cm
- Deflated dimensions: 208 x 93 cm
- Equipped with 20 cells
- Weight: 8 Kg
- Maximum user weight: 200 kg.
Technical characteristics of the 120 cm wide anti-decubitus mattress:
- Color: Blue
- Eschar stage I, II, III and IV
- Latex-free
- Material: TPU Nylon
- Cover material: Nylon PU and cotton lining
- Inflated dimensions: 200 x 120 x 22 cm
- Deflated dimensions: 208 x 93 cm
- Equipped with 20 cells
- Weight: 8 Kg
- Maximum user weight: 200 kg.
We like this mattress because:
- Its safety: it has visual alarms that notify the caregiver of an unusual situation.
- Its comfort: Because it adjusts according to the person's weight
- Its hygiene: Because it can be cleaned easily.
Pressure relief mattresses cannot be returned once inflated. For returns of this product, the original packaging must be intact.
